drip irrigation pipe fittings anti-locking female bypass lock-manufacture,factory,supplier from China

(Total 24 Products for drip irrigation pipe fittings anti-locking female bypass lock)
16mm double lock-nut bypass valve and double thread bypass switch are made of high-quality engineering plastics. The products are of high quality and durable. This kind of drip irrigation bypass switch adopts double thread form with tight connection, good water locking effect and no water leakage.Installation steps: drill 8 mm hole in the main water supply pipe, insert the bypass valve, rotate the lock-nut, and connect the 16mm end with the drip irrigation tape. Tip: after drilling holes on PE pipe and plastic hose, directly insert and install it.
  Kapcsolatfelvétel most
Features: good material, anti-aging, automatic drip irrigation pipe can improve economic benefits, smooth anti-aging inner wall, high impact strength and long service life.
  Kapcsolatfelvétel most
Lock-nut bypass parameterNameLarge hole lock-nut bypassSpecifications16-16mm  12-16mmPackageBaggedQuantity2000 pieces/ bagSales modelWholesale, agencyMaterialSpecial materials have strong aging resistanceApplicable conditionsThe main pipes are PE irrigation pipe and PVC irrigation pipe
  Kapcsolatfelvétel most
Features: good material, anti-aging, automatic drip irrigation pipe can improve economic benefits, smooth anti-aging inner wall, high impact strength and long service life. Anti-solarization, anti-aging, durability, high gloss, high quality, good corrosion resistance.Good toughness, strong adaptability to terrain, easy laying, long service life, more than 8 years naked on the ground. The connection is convenient, and there are special fast connection fittings.
  Kapcsolatfelvétel most
Features: good material, anti-aging, automatic drip irrigation pipe can improve economic benefits, smooth anti-aging inner wall, high impact strength and long service life.
  Kapcsolatfelvétel most
Good toughness, strong adaptability to terrain, easy laying, long service life, more than 8 years naked on the ground. The connection is convenient, and there are special fast connection fittings.
  Kapcsolatfelvétel most
There are two types of drip irrigation tape lock-nut bypass produced by our factory, one is 12-16mm reversed lock bus bypass, the other is 16-16mm reversed lock-nut bypass. Generally, users call this kind of reversed lock-nut bypass as drip irrigation tape lock-nut bypass. 16-16mm lock-nut bypass is also called large hole lock-nut bypass or large body lock-nut bypass. Because both ends are 16mm diameter, this large hole lock-nut bypass is a kind of bypass that is more commonly used in lock-nut pipe fittings.
  Kapcsolatfelvétel most
Drip irrigation : The inlaid drip irrigation pipe is an integrated drip irrigation pipe with a cylindrical dripper embedded on the inner wall of the pipe. The dripper is assembled on the inner wall of the pipe while producing the pipe, which is easy to install and use.Classification1. According to the water outlet method, it is divided into:Pressure Compensated Drip Irrigation Pipes and Non-Pressure Compensated Drip Irrigation Pipes2. According to the structure can be divided into:In-line drip irrigation pipe and inter-pipe drip irrigation pipeapplicationApplicable conditions:1.
  Kapcsolatfelvétel most
The drip irrigation belt snap tee has the following advantages:   1. There are internal parts such as locking hoop, stepped ring seal ring, etc. The nuts on both sides can be disassembled for assembly and use, which improves the product reuse rate. And the product design is scientific and reasonable, the pipe fittings have high strength, good sealing performance, and no water leakage.   2. The drip irrigation belt positive female snap tee is easy to install and use, easy to disassemble, flexible, easy to recycle, beautiful and practical.
  Kapcsolatfelvétel most
The pressure compensation drip irrigation pipe is made of high-density PE pipe with improved nanotechnology and built-in pressure compensation emitter. It is suitable for complex terrain and has the characteristics of good uniformity, strong anti-clogging ability and long service life.The commonly used model of pressure compensation drip irrigation pipe is Φ16. The distance between the emitters is 300mm (200), the wall thickness is 0.6mm, 0.8mm and 1.0mm.
  Kapcsolatfelvétel most
Good toughness, strong adaptability to terrain, easy laying, long service life, more than 8 years naked on the ground. The connection is convenient, and there are special fast connection fittings.
  Kapcsolatfelvétel most
Material: PESpecification: 16mmAdvantages: the octagonal plug is carefully processed by new engineering plastics and excellent anti-aging formula, and has long service life. The product has excellent anti-aging properties and is durable. It is suitable for the tail plugging of drip irrigation pipe and PE pipe.
  Kapcsolatfelvétel most
The drip irrigation belt uses a plastic pipe (drip irrigation pipe lead) to send water through the orifice or dripper on the capillary tube with a diameter of about 10mm to the root of the crop for local irrigation. It is a dripper or drip irrigation belt with a very small outlet orifice, which drips water evenly and slowly into the soil near the roots of the crops.1. The built-in dripper has its own filter window, which has good anti-blocking performance.2. Turbulent flow channel design. Water evenly.3. The dripper and pipeline have strong integrity,4.
  Kapcsolatfelvétel most
Product features: soft tape bypass valve has its own valve, which can control and adjust the flow of each drip irrigation tape at will.Precautions for installation: 1. mainly used for connection of main water tape, PE water tape(wall thickness 0.6-1.6mm), etc.2.The fittings of this specification are connected between the soft drip irrigation tapes with inner diameter of 16mm.
  Kapcsolatfelvétel most
Features: drip irrigation tape can connect main pipe (water tape) instantly. The bypass has its own valve, and the water flow can be adjusted at will.Precautions for installation:1.It is mainly used for connection of main water tape, PE water tape(wall thickness 0.7-3.0mm), etc.
  Kapcsolatfelvétel most
Performance characteristics: wider water path, the water flow is in a turbulent state and there are multiple inlets into the labyrinth, which has strong anti-clogging ability; the main pipeline on the ground is a black water delivery tape or pipe array, which is suitable for drip irrigation in greenhouses and fields.Technical parameterPipe diameter [mm)Distance between emitters (mm)Pressure (Mpa)Flow rate (L/H)Length of laying (m)Diameter 20300(adjustable)0.02 -0.082、3、4≤150Diameter 16300(adjustable)0.02 -0.082、3、4≤100Diameter 12300 (adjustable
  Kapcsolatfelvétel most
The appearance of simple three-way makes the installation of pipe and pipe fittings more convenient and quick in the project. It is made of engineering plastics, corrosion resistant, easy to install and use, and has long service life and economic and practical application.
  Kapcsolatfelvétel most
Instructions for use: Mainly used for capillary head end control (the right end of the pull ring is connected to a 16mm drip tape, which is fixed by the pull ring; the left end is connected to the water delivery main pipe, which can be used for PE pipes (wall thickness greater than 1mm), water delivery tape or use with matching rubber bands , Connect with pvc pipe.)Product introduction: The pull-ring bypass switch is a commonly used drip irrigation switch.
  Kapcsolatfelvétel most
Usage: first, use special puncher to punch holes on the side of soft water tape, then rotate the bypass valve of the product into the hole of soft tape, tighten the screw to fix the bypass valve on the soft water tape, and connect the drip irrigation tape on the other side.
  Kapcsolatfelvétel most
Performance characteristics:When the system pressure changes in the range of 0.05-0.35Mpa, the outflow remains unchanged, and the uniformity of irrigation can reach more than 98%; For larger trees, annular drip irrigation pipes should be installed at the outlet of the current stabilizer to ensure that the trees can be irrigated all around; the bidirectional anti-clogging design of the shunt pipe can ensure the long-term stable movement of the equipment undergroundSteady flow - small pipe outflow irrigationPressure range: 0.05-0.4Mpe; Flow specification: 10L/:20L/h.
  Kapcsolatfelvétel most
The three-way is pipe fittings and pipe connectors. Also known as pipe three-way or three-way pipe fittings, three-way joint, used in the main pipe to branch pipe.The three-way has three openings, namely one inlet and two outlets; Or a chemical pipe fittings with two inlets and one outlet, there are T-shape and Y-shape with equal diameter orifice or reducing orifice, which are used for the convergence of three same or different pipelines. The main function of three-way is to change the direction of fluid.
  Kapcsolatfelvétel most
Suitable for spray irrigation and drip irrigation 16mm PE pipePurpose: used for 16mm PE pipe connecting PE main pipe, PVC main branch bypass joint switch
  Kapcsolatfelvétel most
Installation and usage: the product is used in the project of PE small pipe or drip irrigation pipe. Compared with the traditional PE socket straight through and bypass, the advantages are that the user can adjust the switch of each irrigation pipe tape and increase the controllability of the system.through is made of new engineering plastics, with beautiful appearance, strong anti-aging performance, low cost and long service life. Scientific design, convenient connection, easy disassembly, strong flexibility, good sealing, beautiful and practical, and easy to install and use, easy to recycle.
  Kapcsolatfelvétel most
At present, the built-in cylindrical drip irrigation pipe is Φ16 type drip irrigation pipe. According to the wall thickness, drip irrigation pipes can be divided into three types: 0.6mm, 0.8mm and 1.0mm. The normal working pressure is 0.08MPa-0.1MPa.
  Kapcsolatfelvétel most
Relate News
Drip irrigation is a relatively water-saving irrigation method. Its realization requires the combination of many equipment and efforts. Among them, it includes what we are going to talk about today: drip irrigation tape and drip irrigation pipe. Drip tape and drip irrigation pipe are two different things. So, what is the difference between them?The difference between drip irrigation tape and drip irrigation pipe is as follows:1. The difference in appearance: the drip irrigation tape is flat without water and pressure; while the drip irrigation pipe is cylindrical without water.2.
Features of sheet type drip irrigation belt 1、Integrated flat drip head drip irrigation belt is an integrated drip irrigation belt with flat-shaped drip head set on the inner wall of the pipe belt, which is widely used in greenhouse greenhouses and irrigation of cash crops in large fields.   2、The drip head is integrated with the pipe belt, easy to install and use, low cost and low investment.   3、Drip head has self-filtering window, good anti-clogging performance.   4、Using labyrinth flow channel, with a certain pressure compensation effect.
The Hose Tubing is crafted from new PVC material, long lasting non-poisonous and eco-friendly.Flexible: Industry main flexibility permits tighter turns with fewer elbows for fast, clean set up in garden, flower bed, floor cowl or different landscaped regions.Function: Use as the primary line in a small Drip irrigation gadget or to department off from large tubing to micro-watering gadgetCompatible with maximum manufacturers of 16mm pipe Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays.Perfect for small, slender and tight planting regions, in addition to regions with
Drip irrigation is widely used in agriculture, forestry, and urban greening. Drip irrigation technology can well combine water and fertilizer into one, can achieve water saving, fertilizer saving, process saving, irrigation effect is remarkable, prevent soil secondary salinization and many other advantages. It is of great significance to popularize the use of drip irrigation in some arid and water-scarce areas.The inlaid cylindrical drip irrigation pipe is cylindrical without flushing. The drip head is assembled on the inner wall of the pipe while producing the pipe.
Drip irrigation pipe is an important irrigator in drip irrigation system. According to the water demand of plants, through the low-pressure pipeline system and the irrigator installed on the capillary, the water and the nutrients required by the plants are dripped into the plants evenly and slowly. in the root zone soil.In particular, most of the landscaping plants are laid with a special drip irrigation pipe, and the drip irrigation pipe includes a pipe body and drip holes evenly distributed on the pipe body.
There are various tube sizes for specific plant types. For the most part, drip tubes range between 12 mm to 20 mm in diameter. You will need to use an end cap or water will flow out to the opposite end and flood that part of your garden.
Gated irrigation pipe may be used for each water conveyance and water distribution. whilst a single gated pipeline is used for a number of irrigation sets, one institution of gates should be closed and every other organization opened at each irrigation set trade. this calls for great exertions which may be reduced via automating the machine.maximum automatic gated pipe systems use a separate deliver pipeline for conveyance.
You may be able to do just that while you design your irrigation system if you choose large pipelines than conventional methods of sizing might advocate. pipe sizes are generally selected to maintain the friction lack of the flowing water beneath a few specific fee. a larger pipe has less friction loss and, consequently, a  reduced power demand for pumping. on account that power expenses had been rising even faster than the general inflation rate, yearly electricity expenses will boom whilst capital fees usually stay steady.
The pipe joint with three openings is called tee pipe. Tee pipe is widely used in the pipe network conveying liquid and gas. Due to different conveying media, the material of tee pipe is divided into: cast copper, cast aluminum, plastic, cast iron, cast steel, glass, etc. tee is also widely used.Introduction:As the name suggests, there are three openings, i.e. one in and two out, or two in and one out. It is a kind of chemical pipe fittings, T-shaped and Y-shaped. It has equal diameter nozzle and reducing nozzle. It is used for the collection of three identical or different pipelines.
I. Composition of the microirrigation systemThe micro-irrigation system is composed of water source, front hub, water transmission and distribution pipe network, irrigation device, flow rate, pressure control parts and measuring instrument.1. Water sourceRivers, channels, lakes, reservoirs, wells and springs can be used as microirrigation water sources, and their water quality should meet the requirements of microirrigation.2.
1. The effective utilization rate of water is high. Under the condition of drip irrigation, the irrigation water wets part of the soil surface, which can effectively reduce the ineffective evaporation of soil water. At the same time, because drip irrigation only moistens the soil near the roots of the crops, and the soil moisture content in other areas is low, it can prevent the growth of weeds. Third, the drip irrigation system does not generate ground runoff, and it is easy to grasp the precise watering depth, which is very water-saving.2.
With the adjustment of planting structure, improving the quality of wheat has become the theme of wheat production. Wheat quality is affected by a variety of factors such as variety, environment, ecology and cultivation measures, there are various ways to improve the quality of wheat, in addition to the selection of high-quality varieties, through some cultivation and drip irrigation measures can also significantly improve the quality of wheat.